Properties

MINCLEAR N250 is a natural bleaching earth based in highly adsorptive sepiolite clay.

MINCLEAR N250 shows small size particles with highly porous inner structure, very active in terms of interaction with organic compounds.

MINCLEAR N250 removes of soluble impurities, including coloured compounds, phospholipids and other polar molecules by adsorption, due to its very high surface area (higher than 200 m2/g).

MINCLEAR N250 is designed to perform an excellent filtration rate and a very easy and fast dispersion in vegetable oils.

 Fields of application

  • Vegetable oils, as soybean, palm or sunflower oils.
  • Fats.

 

Properties

MINCLEAR N150 is a natural bleaching earth based on smectites with a great absorption capacity.

MINCLEAR N150 shows a distribution of small particles with high porosity, very active in the retention of organic compounds.

MINCLEAR N150 removes chlorophyll, carotenoids, phospholipids, heavy metals and other molecules, mainly due to high surface area and great cation exchange capacity.

MINCLEAR N150 performs an excellent filtration rate, low oil retention and a very good dispersión in oils and other fats.

 Fields of application

  • Easy-to-bleach vegetable oils, specially recommended in palm and sunflower oils.
  • Easy-to-bleach fats.

 

Properties

MINCLEAR SG62 is sepiolite in granular form with a high sorption capacity. It is obtained by a mechanical process which generates small stable 60/120 ASTM granules (0.12-0.60mm). This grading assures a good performance in terms of sorption.

MINCLEAR SG62 shows a good performance in the retention of different colour bodies, pigments and contaminants in oils or toxics in wastes, making easier, in addition, the handling of this wastes if in form of sludge.

MINCLEAR SG62 facilitates, specifically, the removal of paraffins, waxes and polymeric compounds from the coating of the copper wires, which makes it very convenient in the recycling.

MINCLEAR SG62 is also used as prefilter in solid-liquid separations to improve the lifetime of the main filter bed (zeolites, activated carbon, etc…) and as carrier of microorganisms in the wastewater treatment.

Fields of application

  • Recovery of copper from wires
  • Filtration of oils and chemical products
  • Toxic waste and sludge treatment
  • Prefilters
  • Carrier of microorganisms in wastewater treatment

Properties

MINCLEAR SG61 is a sepiolite in granular form with a high sorption capacity. It is obtained by a mechanical process which generates stable 6/15 ASTM (0,85-4,75mm). This grading is recommended for process which claims for a high filtration rate or if the reduction of the pressure drop is critical, as in the purification of gases.

MINCLEAR SG61 removes impurities and Volatile Organic Compounds (VOCs), undesirable in different process gases as biogas or in exhaust gases.

MINCLEAR SG61 is also used as prefilter in solid-liquid separations to improve the lifetime of the main filter bed (zeolites, activated carbon, etc…)

Fields of application

  • Purification of gases
  • Prefilters
  • Filtration of chemical products

Properties

MINCLEAR SG47 is a sepiolite in granular form with a high sorption capacity. It is obtained by a mechanical process which generates stable 4/7 ASTM (2,36-6,30mm). This grading is recommended for process which claims for a very high filtration rate or if the reduction of the pressure drop is critical, as in the purification of gases.

MINCLEAR SG47 removes impurities and Volatile Organic Compounds (VOCs), undesirable in different process gases as biogas or in exhaust gases.

MINCLEAR SG47 is also used as prefilter in solid-liquid separations to improve the lifetime of the main filter bed (zeolites, activated carbon, etc…)

Fields of application

  • Purification of gases
  • Prefilters
  • Filtration of chemical products

Properties

MINCLEAR SG36 is sepiolite in granular form with a high sorption capacity. It is obtained by a mechanical process which generates stable 30/60 ASTM granules (0.15-0.85mm). This grading assures a perfect balance between performance and filtration rate.

MINCLEAR SG36 removes the surfactants, traces of water and other impurities in Refining and Petrochemistry processes, especially in the Merox process for kerosene production.

MINCLEAR SG36 is also used as prefilter in solid-liquid separations to improve the lifetime of the main filter bed (zeolites, activated carbon, etc…) and as carrier of microorganisms in the wastewater treatment.

Fields of application

  • Kerosene production (Merox process)
  • Filtration of oils and chemical products
  • Dielectric oils recovery by filtration
  • Refining of hydrocarbon distillates as isocyanates and olefins
  • Prefilters
  • Carrier of microorganisms in wastewater treatment

Properties

MINCLEAR SG13 is sepiolite in granular form with a high sorption capacity. It is obtained by a mechanical process which generates stable 15/30 ASTM granules (0.25-1.70mm). This grading is very adequate for those processes which demand high filtration rate or low pressure drop.

MINCLEAR SG13 removes the surfactants, traces of water and other impurities in Refining and Petrochemistry processes, especially in the Merox process for kerosene production.

MINCLEAR SG13 is also used as prefilter in solid-liquid separations to improve the lifetime of the main filter bed (zeolites, activated carbon, etc…) and as carrier of microorganisms in the wastewater treatment.

Fields of application

  • Kerosene production (Merox process)
  • Filtration of oils and chemical products
  • Dielectric oils recovery by filtration
  • Refining of hydrocarbon distillates as isocyanates and olefins
  • Prefilters
  • Carrier of microorganisms in wastewater treatment

Properties

MINCLEAR SF10 is a fine product based on a high sorptive sepiolite, obtained by a mechanical process, showing a very suitable particle size for the stabilization of liquid wastes and sludges, which enables a subsequent good handling.

MINCLEAR SF10 shows a high surface area with many active centers, providing a good performance in the absorption of liquids and the selective retention of organic compounds, heavy metals or soluble inorganic compounds, so it is widely prized in the inertization of wastes.

Fields of application

  • Inertization of hazardous wastes
  • Stabilization of waste sludges
  • Treatment of liquid wastes from different industries as lubes, detergents, paints or pharma

Properties

MINCLEAR SD16 is a granular product based on a high sorptive sepiolite, obtained by a mechanical process, to obtain stable granules with a particle size below 5mm.

MINCLEAR SD16 shows a high surface area with many active centers, providing a good performance in the absorption of liquids and the selective retention of organic compounds, heavy metals or soluble inorganic compounds, so it is widely prized in the inertization of wastes.

MINCLEAR SD16 is also used as prefilter in solid-liquid separations to improve the lifetime of the main filter bed (zeolites, activated carbon, etc…) and as carrier of microorganisms in the wastewater treatment.

Fields of application

  • Inertization of hazardous wastes
  • Stabilization of waste sludges
  • Treatment of liquid wastes from different industries as lubes, detergents, paints or pharma

Properties

MINCLEAR N300 is a natural bleaching earth based on high quality attapulgite with a great absorption capacity.

MINCLEAR N300 shows a distribution of small particles with high porosity, very active in the retention of organic compounds.

MINCLEAR N300 removes chlorophyll, carotenoids, phospholipids, heavy metals and other molecules which introduce colour, mainly due to high surface area.

MINCLEAR N300 performs an excellent filtration rate, low oil retention and a very good dispersión in oils and other fats.

Fields of application

  • Medium- or difficult-to-bleach vegetable oils, as rapeseed, soya, palm or olive oils.
  • Medium- or difficult-to-bleach fats.
  • Biofuels.

Properties

MINCLEAR N200 is a natural bleaching earth based on sepiolite with a great absorption capacity.

MINCLEAR N200 shows a distribution of small particles with high porosity, very active in the retention of organic compounds.

MINCLEAR N200 removes soluble impurities, including colour bodies and other molecules which causes coloration in paraffins and waxes, mainly due to high surface area.

MINCLEAR N200 performs an excellent filtration rate and a very good dispersion in oils, paraffins and other fats.

Fields of application

  • Paraffins with low content in free oils
  • Waxes
  • Odour reduction in paraffins and waxes
  • Easy-to-bleach vegetable oils as sunflower oil

Properties

MINCLEAR N100 is a natural bleaching earth based on smectites with a great absorption capacity.

MINCLEAR N100 shows a distribution of small particles with high porosity, very active in the retention of organic compounds.

MINCLEAR N100 removes different molecules, oxidation bodies and other polar species, mainly due to high surface area and great cation exchange capacity.

MINCLEAR N100 performs an excellent filtration rate, low oil retention and a very good dispersion in paraffins and waxes.

Fields of application

  • Paraffins with low to medium content in free oils.
  • Waxes.

Properties

MINCLEAR H100 is an activated bleaching earth based on high quality bentonite with a great absorption capacity.

MINCLEAR H100 shows a distribution of small particles with high porosity with acid centers on the surface.

MINCLEAR H100 removes chlorophyll, carotenoids, phospholipids, heavy metals and other molecules which introduce colour, mainly due to adsorption capacity and acid catalysis.

MINCLEAR H100 performs an excellent filtration rate, low oil retention and a very good dispersion in oils and fats.

Fields of application

  • Difficult-to-bleach vegetable oils as soya, palm or rapeseed
  • Difficult-to-bleach fats
  • Mineral oil recovery
  • Recycling of used cooking oils

MINCLEAR E100 is a flocculation aid for the treatment of wastewater based on small particles of high quality bentonite, with a great absorption capacity and cation exchange capacity.

Properties

MINCLEAR E100 is specially designed to offer the following advantages:

  • Instant and homogeneous dispersion in the clear water.
  • Reduction of the process time.
  • High performance in the colloids and surfactants removal.
  • Reduction of the dosage of other additives as activated carbon or coagulants.

MINCLEAR E100 does not need the use of voluminous equipment for the activation and reduces the sludge production, saving costs in the subsequent steps in the treatment.

Fields of application

  • Treatment of wastewater polluted by oils, solvents or surfactants.
  • Coagulation of wastewater from electroplating industry.

MINCLEAR BET is a flocculation aid for the treatment of wastewater based on small particles of quality bentonite, with a high absorption capacity and cation exchange capacity.

Properties

MINCLEAR BET shows a great hydration capacity, generating superficially charged particles, which together with its cation exchange capacity provides a great efficiency in the coagulation of colloids of different nature.

MINCLEAR BET generates flocs with great stability and it is 100%-compatible with other additives as polyelectrolytes or inorganic salts.

Fields of application

  • Treatment of wastewater from paper industry.
  • Coagulation of wastewater from electroplating industry.
  • Clarification of beverages.

MINCLEAR BCB is a flocculation aid for the treatment of wastewater based on small particles of bentonite, with absorption capacity and cation exchange capacity.

Properties

MINCLEAR BCB shows a good hydration capacity, generating superficially charged particles, which together with its cation exchange capacity participates efficiently in the coagulation of colloids of different nature.

MINCLEAR BCB generates stable flocs and it is 100%-compatible with other additives as polyelectrolytes or inorganic salts.

Fields of application

  • Treatment of wastewater polluted by oils, solvents or surfactants.
  • Clarification of beverages.

MINCLEAR BC3 is a flocculation aid for the treatment of wastewater based on small particles of quality bentonite, with a good absorption capacity and cation exchange capacity.

Properties

MINCLEAR BC3 shows a high hydration capacity, generating superficially charged particles, which together with its cation exchange capacity provides a great efficiency in the coagulation of colloids of different nature.

MINCLEAR BC3 generates flocs with great stability and it is 100%-compatible with other additives as polyelectrolytes or inorganic salts.

Fields of application

  • Treatment of wastewater from paper industry.
  • Coagulation of wastewater from electroplating industry.

Properties

MINCLEAR AF is a fine product based on a high sorptive attapulgite, obtained by a mechanical process, showing a very suitable particle size for the stabilization of liquid wastes and sludges, which enables a subsequent good handling.

MINCLEAR AF shows a high surface area with many active centers, providing a good performance in the absorption of liquids and the selective retention of organic compounds, heavy metals or soluble inorganic compounds, so it is widely prized in the inertization of wastes.

Fields of application

  • Inertization of hazardous wastes
  • Stabilization of waste sludges
  • Treatment of liquid wastes from different industries as lubes, detergents, paints or pharma

Properties

MINCLEAR AC25 is an attapulgite LVM in granular form with a high sorption capacity. It is obtained by a mechanical and thermal process which generates high resistance 20/50 ASTM granules (0.30-0.85mm). This grading assures a perfect balance between performance and filtration rate.

MINCLEAR AC25 removes the surfactants, traces of water and other impurities in Refining and Petrochemistry processes, especially in the Merox process for kerosene production.

MINCLEAR AC25 is also used as prefilter in solid-liquid separations to improve the lifetime of the main filter bed (zeolites, activated carbon, etc…) and as carrier of microorganisms in the wastewater treatment.

Fields of application

  • Kerosene production (Merox process)
  • Filtration of oils and chemical products
  • Refining of hydrocarbon distillates as isocyanates and olefins
  • Prefilters
  • Carrier of microorganisms in wastewater treatment

Properties

MINCLEAR AC13 is an attapulgite LVM in granular form with a high sorption capacity. It is obtained by a mechanical and thermal process which generates high resistance 15/30 ASTM granules (0.60-1.40mm). This grading is very adequate for those processes which demand high filtration rate or low pressure drop.

MINCLEAR AC13 removes the surfactants, traces of water and other impurities in Refining and Petrochemistry processes, especially in the Merox process for kerosene production.

MINCLEAR AC13 is also used as prefilter in solid-liquid separations to improve the lifetime of the main filter bed (zeolites, activated carbon, etc…) and as carrier of microorganisms in the wastewater treatment.

Fields of application

  • Kerosene production (Merox process)
  • Filtration of oils and chemical products
  • Refining of hydrocarbon distillates as isocyanates and olefins
  • Prefilters
  • Carrier of microorganisms in wastewater treatment